Pages

Monday, 21 November 2016

Stuck in Bootloop - Yu Yunique

 
 

Stuck in Bootloop

Sometimes when you are stuck in Bootloop in Yu Yunique
It doesn't let you open recovery or fastboot.

This is cause of the YU Official Firmware Images.


Fix :-
1. Let your device turn on until YU Logo shows up on the screen.
2. After that press & hold only Power button. Phone will turn off with a vibration for some seconds.
3. Within that time interval press & hold "Vol Up + Power Button" ( You need to follow this step as fast as you can after step 2)
4. Phone will boot to recovery.
5. Dang! Flash any other ROM / Restore Backup.

Stay Tuned! :-)

Tuesday, 3 May 2016

How to Flash [ROM][UNOFFICIAL] XOSP-5.4 for YU yunique (jalebi)

 

XOSP-5.4 for YU yunique (jalebi)



 Downloads:

ROM- Click Here
XOSP Apps(Recommended)- Click Here
GApps- {ARM|6.0|pico} - Click Here

-INSTALLATION INSTRUCTION-

  1. Download the latest build
  2. Boot into Recovery TWRP-3.0.0-0
  3. Go to twrp> then wipe> then advance wipe>
  4. Then click on data and click on change file partition > ext4
  5. Then click on cache >change file partition > ext4
  6. Then wipe dalvik cache,cache,data,system
  7. Then flash rom 
  8. Then Flash XOSP Apps(Required)
  9. Wipe Cache and Dalvik Cache.
  10. Then flash gaaps arm 6.0
  11. Wipe Cache and Dalvik Cache.
  12. Finally, Reboot and ENJOY!! :)


Done.

Credits:

 @Karthick Vee (for building the ROM)
@nilac
CM for the base sources
The Sony Xperia community who provided the system dumps and allowed me to work on the Apps
@malybru and @nightwalkerkg for the two logos

Sunday, 10 April 2016

How to repair your Hard Bricked Yu Yunique

 

Prerequisites:

 1. Charge your phone for atleast 2 hours.
2. Install Qualcomm HS USB Drivers.
                         Download
3. Connect your phone to PC and check if it is being detected by your PC or not.
4. Open Device Manager by right clicking on My computer and selecting Manage.
5. In the left hand side you will see Device Manager option, Click on it.
6. Under the ports section look for RELINK HS USB DLoad or Qualcomm HS USB QDLoader or something of that sort.
7. If it shows with an exclamation mark then you have not installed it perfectly. Try restarting your PC or reinstalling the Drivers. Click Here for Detailed Guide on installing the Driver.

How to Repair???

 Ans. Flashing the STOCK Rom will help you in overcoming the situation.

 Follow this Guide:- Click Here

Comment in the section below if still the problem persists. 

Yunique not detected by PC when flashing STOCK ROM

 



In order to install QHSUSB Drivers.. Your PC must be connected to Internet.

      1. Right Click on "MY COMPUTER"
      2. Click on Manage and Select Device Manager in the Left TAB.
      3. While your phone remains connected to your PC, check for any exclamation mark(yellow coloured) on any of the drivers name QHUSB_DLOAD and click on update.
      4. Select Browse my Computer for Driver Software.
      And browse for the file you downloaded and click on next and Install the drivers.
      5. After this restart your PC and You must see that it is successfully installed.
      6. Now.. Your Problem Must be Solved..
If any PROBLEM is found then never forget to make me know in the comment section below)..


                                       Qualcomm USB Drivers Download - Click Here






Video


Saturday, 9 April 2016

Velocity Kernel v3.0 for Lollipop (5.1.1) ROMs [Yunique]

 



Prerequisites:

1. Rooted Yu Yunique with custom recovery. Here’s a complete guide of rooting your YU Yunique Safely: How to Root YU Yunique & Install TWRP Recovery.

How to Unlock Bootloader HERE - http://thet3chlover.blogspot.in/2015/12/how-to-unlock-bootloader-on-yu-yunique.html

2. Backup all your data: Contacts, Photos, Apps & other files. (Although you will not lose other files except contacts & Apps, but its better to be on the safer side)


How to Install?

 1. Download Velocity Kernel from the Link Below
                       Download

 2. Copy it to the root of SD Card.

3. Boot into TWRP Recovery.

4. Goto Install and click on Velocity Kernel.zip file.

5. Finally Swipe to Flash it and reboot without wiping anything. :)

ENJOY!!

 Notes:

 1. This kernel performs best when used with ROMs based on the latest sources of CyanogenMod.
2. This kernel doesn't requires any other app except for Kernel Adiutor to control the features. Therefore, you people are free to uninstall any other Kernel-Management app. #NoHassles :D

Source Code:
https://github.com/Shoaib0597/Velocity_Kernel_for_Yu-MSM8939/tree/CM-12.1-Jalebi

Credits:
1. Google (for everything related to Android)
2. Cyanogen (for Source Code)
3. Varun Chitre (for ThunderPlug and ThunderCharge)
4. Faux123 (for IntelliDemand Governor, IntelliThermal and IntelliPlug HotPlug)
5. AluCard (for AluCard HotPlug and AluCard Governor)
6. Savoca (for kCAL Colour Control)
7. Shivam Kumar Jha (for help in fixing some errors)
8. Finally the Kernel Developer : Shoaib05

 Source:
http://forums.yuplaygod.com/threads/velocity-kernel-v3-0-for-lollipop-5-1-1-roms.32207/

Friday, 8 April 2016

Fixing Updater Script Error [Yunique]

 

What is a updater script?


To install any ROM through a custom recovery, you need to have an updater-script. It’s basically a few lines of commands that tells your Android recovery what to do. These files are also widely used with Aroma Installer and other scripting engines, but of course everyone knows this already. However, a problem arises when you need to create your own updater-script from scratch, as it’s not always generated during the build process.

Most frequent error that I have seen is the "Updater script error"


To solve this:-

Extract the .zip package of the ROM

Go to META-INF >> com >> google >> android.

Then open "updater-script" binary in Notepad++.

Delete the first line. which says this:- 

assert(getprop("ro.product.device") == "YUNIQUE" || getprop("ro.build.product") == "YUNIQUE" || abort("This package is for device: YUNIQUE; this device is " + getprop("ro.product.device") + "."););


After this repack(add to archive) the contents of the folder extracted.

Note:- Add to zip archive and archive the contents of the folder not the folder directly.

Thursday, 7 April 2016

How to Handle BootLoops or Soft Bricks

 


How to know if there is a Bootloop?

Sometimes after you flash a ROM and reboot it takes much more time than usual to boot because it takes time to remake the cache and load into the memory all Apps. But when you see the Boot Animation for 5mins or more you should be sure that it is a bootloop. So Below is the way to handle such cases and its not a situation to panic. We can also term bootloop as SoftBrick. When you see that the ROM doesn't bootup after 5mins then you should turn off your phone otherwise if you leave your phone in the same state the SoC may heatup much more and may lead to damage the chipset.
So the first step that you should take is to turn it off. In Yu Yunique you can do this by two ways. Either hold Volume Up + Power Button otherwise hold Volume Down + Power Button. From these two ways any one of them must work.

 Prerequisites:

  1. Download and install required USB Drivers on PC. Alternative.
  2. Install and setup ADB and Fastboot drivers – Windows | Mac.
  3. Unlock Bootloader on YU Yunique.

How to Defeat a Bootloop?

  1. After you turn off your phone. Boot into Fastboot mode by pressing and holding Volume Up + Power Button(For Yunqiue).
  2. Then Connect the Phone to PC. Note:- You must have had installed the Fastboot and ADB Drivers.
  3. Hold Shift and Right click on ADB and Fastboot Folder and Select 'Open Command Window Here' option.
  4. In Command Window, Type:- fastboot devices
  5. You must see some a combination of alphabet and numbers written on the screen that should show up. If not you must properly connect the device to PC, properly install the drivers and Reboot your PC and then try again.
  6. Then download CyanogenMod Recovery from the give link. Download
  7. Then Copy the file inside the ADB and Fastboot Folder and rename it to cmrecovery.img
  8. Type in Command Window:- fastboot boot cmrecovery.img
  9. Then After about 5sec you can see CyanogenMod recoery on your phone.
  10. From there Select: Wipe Data/Factory Reset > Yes.
  11. Then Select: Wipe cache partition
  12. Finally Click on: Reboot System Now.

Now ENJOY!! Finally the ROM will boot perfectly. If any other problem occurs then do not forget to notify me in the Comment Section Below **. 

Wednesday, 6 April 2016

Resurrection Remix v5.6.6[6.0.1_r22] [ROM][YUNIQUE][UNOFFICIAL]

 

Resurrection Remix v5.6.6




Downloads:

GApps- {ARM|6.0|pico} - Click Here

-INSTALLATION INSTRUCTION-

  1. Download the latest build
  2. Boot into Recovery TWRP-3.0.0-0
  3. Go to twrp> then wipe> then advance wipe>
  4. Then click on data and click on change file partition > ext4
  5. Then click on cache >change file partition > ext4
  6. Then wipe dalvik cache,cache,data,system
  7. Then flash rom then gaaps arm 6.0


Done.

Credits:

@Tanuj Jain
@amalappunni 
XDA developers
CM team
Omni team
Slim rom

Temasek V5.2 for YU YUNIQUE [ROM][6.0.1] for Yu YUnique

 


Installation
  • Boot into Recovery TWRP-3.0.0-0
  • Go to twrp> then wipe> then advance wipe>
  • Then click on data and click on change file partition > ext4
  • Then click on cache >change file partition > ext4
  • Then wipe dalvik cache,cache,data,system
  • Then flash rom then gaaps arm 6.0
  • Done

Downloads :
  1. Build
  2. GAPPS
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP-3.0.0
Based On: CyanogenMod

Version Information
Status: Beta
Current Beta Version: 20160323
Beta Release Date: 2016-03-23

Created 2016-03-23
Last Updated 2016-03-23

Sungsonic™HD ROM - [SSHD-MM-6.0.1-MMB29U-PR1.0] - Android-M-6.0.1

 



About Sungsonic™ HD

 Sungsonic™ HD Is based on latest "Stock Lollipop 5.1.1" version released from Yunqiue..This firmware is designed for those peoples who specially likes performance, stock look, tweaks, optimum audio & video quality and gaming and maximum customization...Since from 4th Jan 2013 Sungsonic™ HD Has been downloaded about more than 1,00,000 times & recorded all most more than Half Millions of page views in Samsung Galaxy Tab2 Forum due to its Uniqueness and new features..........and still SSHD dominating in the World as a Mega hit Rom of Tab2 community...And Finally its released for YU Yunique.

 ADDITIONAL FEATURES ADDED TO AOSP :

 Advanced reboot.
Inbuilt Root.
Layers Manager.
SSHD Tuner [Empty as of now ..It wont take too much time to make it full !!]

Built Using UBERTC Toolchain for Both Rom & kernel.

How to Install?

1. Download the ROM zip file from here:-

           Download: Sungsonic HD

2. Download Stock boot.img from here :-  http://j.gs/6xRq
(for backup incase the rom doesnt boot up or stuck at boot logo)

3. Switch off your device. Press & hold Power button+Volume up button. This will boot your device into TWRP Recovery.
4. Goto Wipe> Advanced Wipe
5. Select Data and Cache and click on Repair or change File System.
6. Then Click on Change File System, Click on "F2FS" and Confirm it.
7. Goto Wipe> Advanced Option> Wipe Cache, Data, System, and Dalvik cache.Please don’t wipe Internal memory.
8. Go back to main menu & select Install zip from SDcard & locate the downloaded SSHD-ROM.zip file from the list of files.
8. Swipe to Install. Wait for the message, Install successful!

Now flash GApps package ( Select ARM>Android 5.1>Pico from the below link & download the package) Goto Install & select Gapps package.
Swipe to Install.

Download GApps{ ARM | 5.1 | Pico } :- Download

9. Now clear cache & dalvik cache. That’s it! Now reboot your device.


Screenshots:



Credits:-
@darshan1205

How to Install Stock Recovery in Yu Yunique

 
What is Recovery?
Recovery is a limited boot mode, independent of your normal Android operating system. In the stock recovery, you can install OTA update packages, wipe data, and wipe the cache partition. The feature set available depends on the specific recovery installed. In general, stock recoveries (which come pre-installed on your device) are the most limited. They typically only allow manufacturer updates to be performed and remain mostly invisible to the end user.


Preparations:
  1. To avoid data loss while rooting, it is always recommended to have a backup of all of your important data and stuff. Backup SMS | Contacts | Call Logs etc.
  2. Enable USB Debugging from Developer Options.
  3. Charge Yunique to at least 65% before you proceed.
  4. Download and install required USB Drivers on PC. Alternative.
  5. Install and setup ADB and Fastboot drivers – Windows | Mac.
  6. Unlock Bootloader on YU Yunique.
Disclaimer: I don’t take any responsibility for any damage to your YU Yunique and we recommend to proceed with the below steps only if you understand what you are doing and proceed at your own risk.

 Downloads:
Android Stock Recovery for YU Yunique – Download

How to Install Android Stock Recovery on YU Yunique YU4711:

Step 1: Download the Stock Recovery from the downloads section.
Step 2: Rename it to stockrecovery.img and copy it inside the ADB or Fastboot folder or the folder where fastboot.exe or adb.exe is located.
Step 3: Open the ADB or Fastboot folder and press and hold the shift key and right click inside the folder at the empty space and choose Open Command Window Here.
Step 4: Boot YU Yunique into Fastboot Mode.
  • Power off YU Yunique.
  • Press and hold the Volume Up button and connect YU Yunique to PC.
Step 5: Once you are in Fastboot Mode, type the following commands:
fastboot flash recovery stockrecovery.img
This command flashes the CM Recovery on YU Yunique.
fastboot reboot
This command reboots YU Yunique to normal mode.
That’s it now you have Stock Recovery installed on YU Yunique.

How to install CyanogenMod Recovery (CM Recovery) in Yunqiue

 
What is Recovery?
Recovery is a limited boot mode, independent of your normal Android operating system. In the stock recovery, you can install OTA update packages, wipe data, and wipe the cache partition. The feature set available depends on the specific recovery installed. In general, stock recoveries (which come pre-installed on your device) are the most limited. They typically only allow manufacturer updates to be performed and remain mostly invisible to the end user. Simple recovery, used by the CyanogenMod Installer, is another limited recovery meant to perform only basic tasks, like updates and wipes. Custom recoveries, described below, offer a much larger suite of tools. The most important of these is the ability to make a full device backup which can later be restored if Android misbehaves in an unrecoverable fashion.


Preparations:
  1. To avoid data loss while rooting, it is always recommended to have a backup of all of your important data and stuff. Backup SMS | Contacts | Call Logs etc.
  2. Enable USB Debugging from Developer Options.
  3. Charge Yunique to at least 65% before you proceed.
  4. Download and install required USB Drivers on PC. Alternative.
  5. Install and setup ADB and Fastboot drivers – Windows | Mac.
  6. Unlock Bootloader on YU Yunique.
Disclaimer: I don’t take any responsibility for any damage to your YU Yunique and we recommend to proceed with the below steps only if you understand what you are doing and proceed at your own risk.

 Downloads:
CyanogenMod Recovery for YU Yunique – Download

How to Install CyanogenMod Recovery on YU Yunique YU4711:

Step 1: Download the CM Recovery from the downloads section above in CyanogenMod Official Site.
Step 2: Rename it to cmrecovery.img and copy it inside the ADB or Fastboot folder or the folder where fastboot.exe or adb.exe is located.
Step 3: Open the ADB or Fastboot folder and press and hold the shift key and right click inside the folder at the empty space and choose Open Command Window Here.
Step 4: Boot YU Yunique into Fastboot Mode.
  • Power off YU Yunique.
  • Press and hold the Volume Up button and connect YU Yunique to PC.
Step 5: Once you are in Fastboot Mode, type the following commands:
fastboot flash recovery cmrecovery.img
This command flashes the CM Recovery on YU Yunique.
fastboot reboot
This command reboots YU Yunique to normal mode.
That’s it now you have CM Recovery installed on YU Yunique.

Tuesday, 23 February 2016

CARBON LP-5.1.1 UNOFFICIAL FOR YUNIQUE JALEBI

 
[​IMG]



This ROM is provided as is, it is UNOFFICIAL and there is no official support. Do not post bugs in the CM bug tracker.

We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.

Please feel free to look at, build, and use our code on Carbon ROM https://github.com/CarbonROM


We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.

Special thanks also go to Slim Rom for some of their features, AOKP, and anyone else we may have borrowed commits from that hasn't been mentioned here. If you feel you have been unfairly left out, please - let us know.

While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in #teamcarbon on freenode IRC.

Pre-requisite:

 1. Rooted Yu Yunique with custom recovery. Here’s a complete guide of rooting your YU Yunique Safely: How to Root YU Yunique & Install TWRP Recovery. How to Unlock Bootloader HERE - http://thet3chlover.blogspot.in/2015/12/how-to-unlock-bootloader-on-yu-yunique.html

2. Backup all your data: Contacts, Photos, Apps & other files. (Although you will not lose other files except contacts & Apps, but its better to be on the safer side)

GUIDE to Install:

1. Download the ROM zip file from here:-

                                   Download

2. Download Stock boot.img from here :-  http://j.gs/6xRq

(for backup incase the rom doesnt boot up or stuck at boot logo)

3. Switch off your device. Press & hold Power button+Volume up button. This will boot your device into TWRP Recovery.

4. Goto Wipe> Advanced Wipe

5. Select Data and Cache and click on Repair or change File System.

6. Then Click on Change File System, Click on "F2FS" and Confirm it.

7. Goto Wipe> Advanced Option> Wipe Cache, Data, System, and Dalvik cache.Please don’t wipe Internal memory.

8. Go back to main menu & select Install zip from SDcard & locate the downloaded CarbonLP-ROM.zip file from the list of files.

8. Swipe to Install. Wait for the message, Install successful!

Now flash GApps package ( Select ARM>Android 5.1>Pico from the below link & download the package) Goto Install & select Gapps package.

Swipe to Install.

Download GApps{ ARM | 5.1 | Pico } :- Download

9. Now clear cache & dalvik cache. That’s it! Now reboot your device.


 SCREENSHOTS:
Here -> http://d-h.st/AiE0


SOURCES:
CARBON SOURCES: https://github.com/CarbonROM
DEVICE SOURCE: https://github.com/karthick111/android_device_yu_jalebi/tree/carbon-lp5.1.1
KERNEL SOURCE: https://github.com/karthick111/android_kernel_cyanogen_msm8916
PROPRIETARY VENDOR: https://github.com/TheMuppets/proprietary_vendor_yu


 CREDITS:

Google
CyanogenMod team
A Yunique Developer (not me. :p)

Temasek's cm-12.1 for YUNIQUE[ROM][UNOFFICIAL][5.1.1_r34][20160213]

 
[​IMG]




   temasek's UNOFFICIAL CM12.1


This is an UNOFFICIAL build of CM12.1 ( CyanogenMod 12.1) for YU YUNIQUE and by NO means this is my ROM. I am just compiling from CM Source and 100% credits goes to all other coders who contributed to CyanogenMod.

This is similar to a nightly from CM but has some extra goodies baked in. If you can't handle some things possible being broken, please don't use this and then complain to me for building it.

Pre-requisite:

1. Rooted Yu Yunique with custom recovery. Here’s a complete guide of rooting your YU Yunique Safely: How to Root YU Yunique & Install TWRP Recovery.

How to Unlock Bootloader HERE

2. Backup all your data: Contacts, Photos, Apps & other files. (Although you will not lose other files except contacts & Apps, but its better to be on the safer side)


How to Install:

1. Download the ROM file from the below link & place it in your SDcard/Internal memory.
2. Switch off your device.
3. Press & hold Power button+Volume up button. This will boot your device into TWRP Recovery.
4. Goto Wipe> Advanced Wipe
5. Select Data and Cache and click on Repair or change File System.
6. Then Click on Change File System, Click on "F2FS" and Confirm it.
7. Goto Wipe> Advanced Option> Wipe Cache, Data, System, and Dalvik cache.Please don’t wipe Internal memory.
8. Go back to main menu & select Install zip from SDcard & locate the downloaded TemasekROM.zip file from the list of files.
8. Swipe to Install. Wait for the message, Install successful!

 Now flash GApps package ( Select ARM>Android 5.1>Pico from the below link & download the package) Goto Install & select Gapps package.
Swipe to Install.

 9. Now clear cache & dalvik cache. That’s it! Now reboot your device.

Credits:-

@slayher (Tony Lahyer)
@christer12 (Christer Bjor)
@arter97 
@temasek
@PartimusPrime
@android.zealot.fervor
@darshan1205 

Download:-

AOSP [AOSParadox] MarshMallow 6.0.1 Pure Marshmallow [Vanilla Based] for YU Yunique

 
AOSParadox 2.1 for YU Yunique​
What's CodeAurora Forums ?
Code Aurora Forum (CAF) is a consortium of companies with projects serving the mobile wireless industry. Software projects it concerns itself with are e.g. Android for MSM, Femto Linux Project, LLVM, MSM WLAN and Linux-MSM. Code Aurora is basically AOSP plus all Qualcomm specific enhancements and optimization.

What's AOSParadox Project ?
AOSParadox is a vanilla ROM. Our goal is to pick the least amount of commits possible on AOSP code. Why trying to add features, when CodeAurora provide us with chipset's specific sources ?
At the opposite of most of ROMs that you can find, the trees are made by oursleves to be integrated in this new ROM type.

What should I be aware of ?
Everything is custom and made to work with CodeAurora Forum's sources so customs kernels won't boot (ramdisk is different, selinux rules too, ...).

What doesn't work ?
  • Tell me
My few personnal additions on top of AOSP:
  • Custom Hardware Keys binding
  • 1080p recording from camera
  • "Reboot" and "Plane Mode" in Power Menu
  • Marshamllow Wallpaper
  • Marshamllow Bootanimation
  • Renaming the OTA package
  • Materialized Icons
  • File Manager
Downloads : 
AOSParadox_YU-20160131-jalebi.zip - Download

Recommened GAPPS : Download Configuration : ARM / 6.0 / Pico

How to install ?
  1. Transfer the downloaded AOSP & GApps zip, in your YU Yunique.
  2. Turn off / Switch your YU Yunique.
  3. Press and hold volume down and power keys at the same time to boot into Recovery mode.
  4. Do not forget to perform a nandroid backup. Goto backup option in TWRP and select all the partitions including System, Data, Boot, Recovery and swipe right to backup.
  5. After performing the ROM backup, go back to the TWRP main menu and tap the wipe button.
  6.  Goto Wipe> Advanced Wipe
  7.  Select Data and Cache and click on Repair or change File System.
  8. Then Click on Change File System, Click on "F2FS" and Confirm it.
  9. Goto Wipe> Advanced Option> Wipe Cache, Data, System, and Dalvik cache.Please don’t wipe Internal memory.
  10. Next, swipe to confirm. Wait for the wiping process to complete.
  11. Next, Goto TWRP main menu & goto Install option.
  12. Locate the AOSP downloaded zip file & tap on it. Now swipe to Install the ROM.
  13. Once the installation process is finished successfully.
  14. Again Goto TWRP Main menu, Tap on Install & locate the GApps zip file. Swipe to install GApps Package. {Note:- Flash Gapps immediately after flashing the ROM before rebooting. If flashed after flashing the ROM and rebooting, the setup may crash.}
  15. From recovery select “reboot” and enjoy.
Source Code
  https://github.com/AOSParadox

:Screenshots:





Credits:
@amalappunni- for testing
@h2o64 - for building

Source:- 
http://forums.yuplaygod.com/threads/caf-aosp-la-br-1-2-6-01310-8x16-0-6-0-1-stable-aosparadox-project-2-1-20160313.31154/

Saturday, 26 December 2015

BlissPop 4.0.3 For Yu Yunique (Jalebi) Installation Guide

 





(Presonally Tested Works Fine)

 GUIDE TO FLASH BLISSPOP 4.0.3 (JALEBI)

You must have Root access and TWRP recovery installed.
Guide To Install TWRP Stable HERE -
http://thet3chlover.blogspot.in/2015/12/recovery-twrp-2870-for-yu-yunique-stable.html
Guide To Unlock Bootloader HERE -
http://thet3chlover.blogspot.in/2015/12/how-to-unlock-bootloader-on-yu-yunique.html

1. Download the ROM zip file from here:-
    Bliss Pop ROM Build 1: Download
    Bliss Pop ROM Build 2: Download

2. Download Stock boot.img from here :-  http://j.gs/6xRq
(for backup incase the rom doesnt boot up or stuck at boot logo)

3. Switch off your device. Press & hold Power button+Volume up button. This will boot your device into TWRP Recovery.
4. Goto Wipe> Advanced Wipe
5. Select Data and Cache and click on Repair or change File System.
6. Then Click on Change File System, Click on "F2FS" and Confirm it.
7. Goto Wipe> Advanced Option> Wipe Cache, Data, System, and Dalvik cache.Please don’t wipe Internal memory.
8. Go back to main menu & select Install zip from SDcard & locate the downloaded BlissPopROM.zip file from the list of files.
8. Swipe to Install. Wait for the message, Install successful!

Now flash GApps package ( Select ARM>Android 5.1>Pico from the below link & download the package) Goto Install & select Gapps package.
Swipe to Install.

Download GApps{ ARM | 5.1 | Pico } :- Download

9. Now clear cache & dalvik cache. That’s it! Now reboot your device.

10. (Optional Install C-Apps from here) :- http://j.gs/7244720/capps

Done :-D Reboot the wait and to see the taste of BlissPop 4.0.3 :-D

Build Date:- 13th December 2015
Rom Version :- BlissPop 4.0.3 based on Android 5.1.1

Whats Working.
Almost Everything :-D

Bugs:-
Not seen any. You tell :-)

Screenshots:-


Credits:

Build1: @ShivamKumarJha
Build2: @Vinay Salunke 

Source:- http://forums.yuplaygod.com/threads/rom-jalebi-5-1-1_r26-unofficial-blisspop-v4-0-3-1st-dec.29220/


Get updates in your email box

Complete the form below, and we'll send you our recent update.

Deliver via FeedBurner
© Copyright 2015 thet3chlover. Designed by Bloggertheme9 | Distributed By Blogger Templates20. Powered by Blogger.